Printer Left Door Open - Lexmark X940e Service Manual

7510-XXX

Printer left door open

Step
1 Check the printer left door closed actuator located on the
rear of the printer left door assembly for damage.
Is the above component, as shown in the graphic below,
free of damage?
2
Check the printer left door for proper operation.
Does the above component open and close properly?
3 Check the sensor (printer left door interlock) for operation.
1. Enter the Diagnostics Menu.
2. Select BASE SENSOR TEST.
3. Select Cover and Door.
4. Select Door A left side.
Does the display on the operator panel change every time
the actuator on the above switch is operated?
4 Check the switch (printer left door interlock) for proper
connection.
Is the above component properly connected?
5 Perform a print test.
Does the error continue when the power is turned off/on?
2-172
MFP Service Manual
Check Yes
Go to step 2. Replace the
printer left door
closed actuator
(40X0498).
Go to step 3. Replace the
printer left door
assembly.
Go to
door assembly
removal" on
page
Go to step 5. Go to step 4.
Replace the switch Replace the
(printer left door connection.
interlock).
Go to "Switch
(printer left door
interlock)
removal" on
page 4-19.
Replace the upper Problem solved.
printer engine card
assembly.
Go to "Upper
printer engine
card assembly
removal" on
page 4-74.
No
"Printer left
4-26.