Standard Media Exit Shift Error; Fuser Main Lamp Overheat Error - Lexmark X940e Service Manual

Step
2 Check the fuser cooling fan for proper operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Fuser cooling fan.
Does the above component operate properly?
3 Check the fuser cooling fan for proper connection.
Is the above component properly connected?
4 Perform a POR.
Does the error occur when the power is turned off/on?

918.00 Standard media exit shift error

Step
1 Perform a POR.
Does the error occur when the power is turned off/on?

920.00 Fuser main lamp overheat error

Step
1 Reset the fuser overheat failure lock out condition.
1. Enter the Diagnostics Menu.
2. Touch Fuser temp fail clear.
3. Touch Fuser temp fail clear.
Perform a POR.
Does the error occur when the power is turned off/on?
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
Check
Yes
Go to step 4. Go to step 3.
Replace the fuser Replace the
cooling fan. connection.
Go to "Fuser
cooling fan
removal" on
page 4-89
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-77.
Yes
Replace the upper Problem solved.
printer engine card
assembly.
Go to "Upper
printer engine
card assembly
removal" on
page 4-74.
Yes
Go to step 2. Go to step 5.
Diagnostic information
7510-XXX
No
No
No
2-145