Lexmark X940e Service Manual page 144

7510-XXX
Error code or
message
941.00
Service tray 1
failure
941.01
Service tray 1
failure
942.00
Service tray 2
failure
942.01
Service tray 2
failure
943.00
Service tray 3
failure
943.01
Service tray 3
failure
944.00
Service tray 4
failure
944.01
Service tray 4
failure
980.00
Service tray 2
comm.
980.01
Service device
comm
2-30
MFP Service Manual
Error contents
Switch (media size) size
sensing error (tray 1)
sensor (media level) late
error (tray 1)
Switch (media size) size
sensing error (tray 2)
Sensor (media level) late
error (tray 2)
Switch (media size) size
sensing error (tray 3)
Sensor (media level) late
error (tray 3)
Switch (media size) size
sensing error (tray 4)
Sensor (media level) late
error (tray 4)
Communication error with
1TM, 3TM or TTM assembly
HVPS controller
communication error
Description/Action
The tray 1 switch (media size) detected an invalid
size setting.
Go to "941.00 Switch (media size) size sensing
error (tray 1)" on page 2-155.
The sensing area of the sensor (media level) in the
media tray 1 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "941.01 Sensor (media level) late error
(tray 1)" on page 2-155.
The tray 2 switch (media size) detected an invalid
size setting.
Go to "942.00 Switch (media size) size sensing
error (tray 2)" on page 2-156.
The sensing area of the sensor (media level) in the
media tray 2 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "942.01 Sensor (media level) late error
(tray 2)" on page 2-157.
The tray 3 switch (media size) detected an invalid
size setting.
Go to "943.00 Switch (media size) size sensing
error (tray 3)" on page 2-158.
The sensing area of the sensor (media level) in the
media tray 3 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "943.01 Sensor (media level) late error
(tray 3)" on page 2-159.
The tray 4 switch (media size) detected an invalid
size setting.
"944.00 Switch (media size) size sensing
Go to
error (tray 4)" on page 2-160.
The sensing area of the sensor (media level) in the
media tray 4 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "944.01 Sensor (media level) late error
(tray 4)" on page 2-161.
A communication error has occurred with the
1TM,3TM or TTM controller card assembly and the
upper printer engine card assembly.
"980.00 Communication error with 1TM,
Go to
3TM, or TTM assembly" on page
A communication error has occurred with the
developer roll HVPS card assembly and the upper
printer engine card assembly.
Go to "980.01 HVPS controller communication
error" on page 2-163.
2-162.