Transfer Belt Cleaning Assembly Removal; Standard Media Exit Shift Assembly Removal - Lexmark X940e Service Manual

Transfer belt cleaning assembly removal

Warning: When removing the transfer belt unit assembly, do not touch the belt surface, or damage will occur.
Note: It is not required to completely remove the transfer belt unit assembly (B) from the machine. It can be
partially pulled out to provide access to the transfer belt cleaning assembly (A).
1. Remove the transfer belt unit assembly. See
2. Remove the two screws securing the transfer belt cleaning assembly (A) to the transfer belt unit assembly (B).
3. Remove the transfer belt cleaning assembly (A).
Replacement warning: When reinstalling the transfer belt unit assembly, do not touch the belt surface, or
damage will occur.

Standard media exit shift assembly removal

1. Remove the rear cover assembly. See
Warning: Ensure that the rear left middle cover is removed before removing the rear left upper cover, or damage
will occur.
2. Remove the rear left middle cover. See
3. Remove the rear left upper cover. See
4. Disconnect the two connectors from the standard media exit shift assembly (A).
5. Remove the four screws securing the standard media exit shift assembly (A) to the machine.
6. Remove the standard media exit shift assembly (A) from the machine.
"Transfer belt unit assembly removal" on page
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
"Rear left upper cover removal" on page
7510-XXX
4-16.
4-5.
4-6.
4-7.
4-17
Repair information