Cooling Fan Removal - Lexmark 4500-00 Series Service Manual

4500

Cooling fan removal

1. Open the front cover. See
information.
2. Remove the top cover. See
information.
3. Remove the left side cover. See
for more information.
4. Remove two cooling fan screws.
5. Remove the toner cartridge.
6. For the E220/E321/E323, remove the right side cover and the
controller board cover.
7. Tilt the printer carefully to the rear so it is resting on the ASF.
8. Remove the four bottom cover screws.
9. Disconnect the cooling fan cable from the engine card
(E320/E322) or controller board (E220/E321/E323).
10. Remove the cooling fan.
4-8
Service Manual
"Front cover" on page 4-4
"Top cover" on page 4-4
"Left side cover" on page 4-5
for more
for more