2000-Sheet Dual Input (Ttm)-Sensor (Media Out) Removal - Lexmark X940e Service Manual

2000-sheet dual input (TTM)—sensor (media out) removal
1. Remove the tray module left cover. See
page 4-164.
2. Remove the TTM media tray 3 assembly. See
removal" on page
3. Remove the TTM media tray 4 assembly. See
removal" on page
4. Remove the tray 4 media transport assembly. See
assembly removal" on page
5. Remove the media feed unit assembly. See
removal" on page
page 4-180, or
6. Remove the media out actuator. See
page 4-187.
7. Disconnect the connector from the sensor (media out) (A).
8. Release the hooks securing the sensor (media out) (A) to the media feed unit assembly.
9. Remove the sensor (media out) (A).
"2000-sheet dual input (TTM)– tray module left cover removal" on
4-168.
4-167.
4-172.
4-180, "2000-sheet dual input (TTM)–media feed unit assembly removal (tray 3)" on
"2000-sheet dual input (TTM)–media feed unit assembly removal (tray 4)" on page
"2000-sheet dual input (TTM)–media out actuator removal" on
"2000-sheet dual input (TTM)–TTM media tray 3 assembly
"2000-sheet dual input (TTM)–TTM media tray 4 assembly
"2000-sheet dual input (TTM)–TTM tray 4 media transport
"2000-sheet dual input (TTM)–media feed unit assembly 2
Front
Harness
A
Hook
Hooks
Lower view
7510-XXX
4-176.
4-189
Repair information