Ccd Error - Lexmark X940e Service Manual

Step
7 Check the scanner PS card assembly for connection.
Is the above card connected properly?
8 Perform a POR.
Does the error continue when the power is turned off/on?

845.00 CCD error

Step
1 Check the CCD/lens assembly connection.
Is the CCD/lens assembly connected properly?
2 Check all the connections on the scanner controller card
assembly.
Are all the connections connected properly?
3
Perform a POR.
Does the error remain?
Check
Check
Yes
Replace the Replace the
scanner PS card connection.
assembly.
Go to "Scanner
PS card
assembly
removal" on
page 4-123.
Replace the Problem solved.
scanner
controller card
assembly.
Go to "Scanner
controller card
assembly
removal" on
page 4-120.
Yes
Go to step 2. Replace the
connection.
Replace the Replace the
CCD/lens connection.
assembly.
Replace the
scanner
controller card
assembly.
Go to "Scanner
controller card
assembly
removal" on
page 4-120.
Diagnostic information
7510-XXX
No
No
2-121