Lexmark X940e Service Manual page 133

Error code or
message
294.00 Sensor (ADF inverter) static
jam
Scanner jam
294.01 Sensor (ADF pre-registration)
late jam (side 2)
Scanner jam
294.02 Sensor (ADF pre-registration)
lag jam (inverting)
Scanner jam
295.00 Size mismatch Jam (mix-
size)
Scanner jam
295.01 Size mismatch Jam (no mix-
size)
Scanner jam
295.02 Invalid combine size jam
Scanner jam
295.03 Media too short size jam
Scanner jam
295.04 Media too long size jam
Scanner jam
295.05 Mixed size not supported
Scanner jam
298.01 Scanner power cable missing
or unplugged
31 Black toner cartridge
detection error
Missing or
defective black
cartridge
Error contents Description/Action
Media remains on the sensor (ADF inverter).
Go to "294.00 Sensor (ADF inverter) static jam"
on page 2-93.
The media is late reaching the sensor (ADF pre-
registration) within the specified time after the ADF
registration motor was turned on.
Go to "294.01 Sensor (ADF pre-registration) late
jam (side 2)" on page 2-94.
The media reached the sensor (ADF pre-
registration) but did not clear it within the specified
time.
Go to "294.02 Sensor (ADF pre-registration) lag
jam (inverting)" on page
During mixed original document feeding, it was
detected that the Fast Scan Direction size was
different from the width of the document guide.
Go to "295.00 Size mismatch jam (mix-size)" on
page 2-99.
The second and subsequent documents are
different size from the first document.
Go to "295.01 Size mismatch jam (no mix-size)"
on page 2-101.
An invalid document size combination was
detected.
Go to "295.02 Invalid combine size jam" on
page 2-102.
The system detected a document with a length
shorter than 115mm in the Slow Scan Direction.
Go to "295.03 Too short size jam" on page
The system detected a document with the following
length in the Slow Scan Direction:
• Simplex mode: 672.4mm or longer
• Duplex mode: 480.1mm or longer
Go to "295.04 Too long size jam" on page
When feeding mixed size originals, the user has
selected a fixed size from the menu settings.
The scanner is not receiving input power.
Go to Go to "295.05 Mixed size not supported"
on page 2-106.
The Black toner cartridge is defective not installed.
Go to "Toner cartridge error" on page
Diagnostic information
7510-XXX
2-96.
2-103.
2-104.
2-177.
2-19