Transfer Belt Lift Latch Assembly Removal - Lexmark X940e Service Manual

7510-XXX
Replacement warning: When replacing the PC unit assembly (C), ensure that the rail on the PC unit assembly
(C) is properly inserted into the metal track or physical binding and damage will occur. In the event that the PC unit
assembly (C) becomes bound, it can be removed by twisting it in a clockwise direction while pulling it from the
machine.

Transfer belt lift latch assembly removal

1. Remove the printer front door assembly. See
2. Remove the front left cover. See
3. Remove the waste toner cartridge cover. See
4. Remove the waste toner cartridge sensor assembly. See
page 4-39.
5. Remove the sensor (waste toner cartridge full). See
page 4-40.
6. Remove the inner cover. See
7. Remove the two screws securing the transfer belt lift latch (A) to the machine.
8. Release the harnesses from the clamp.
4-60
MFP Service Manual
"Printer front door assembly removal" on page
"Front left cover removal" on page
"Waste toner cartridge cover removal" on page
"Sensor (waste toner cartridge full) removal" on
"Inner cover removal" on page
4-9.
"Waste toner cartridge sensor assembly removal" on
4-43.
4-3.
4-39.