Key Repeat Initial Delay; Key Repeat Rate; Exiting Configuration Menu - Lexmark X940e Service Manual

7510-XXX

Key Repeat Initial Delay

When a key is touched repeatedly, this is the delay before the key begins repeating. The delay ranges from .25
seconds to 5 seconds. The default is 1 second. Values are given in increments of .25 seconds.
To change this setting:
1. Touch Key Repeat Initial Delay from the Configuration Menu.
2. Touch
3. Touch Submit to save the change.
4. Touch Back to cancel and return to the Configuration Menu.

Key Repeat Rate

This is the number of times per second that a repeating key will repeat. The range is 1—100, with a default of 15
times per second.
To change this setting:
1. Touch Key Repeat Initial Delay from the Configuration Menu.
2. Touch
3. Touch Submit to save the change.
4. Touch Back to cancel and return to the Configuration Menu.

Exiting Configuration Menu

From the Configuration Menu, touch Back until a graphic appears with Exit Config Menu in the lower right
corner. Touch Exit Config Menu to exit the Configuration Menu. Resetting the Printer appears on the
LCD. The printer performs a POR, and the following graphic appears on the LCD:
3-50
MFP Service Manual
to increase the value or
to increase the value or
Fax
Ready. Toner low.
Status/
Supplies
Touch any button to begin.
to decrease the value.
to decrease the value.
Copy
FTP
E-Mail
Menus