Scanner Ps Card Assembly Removal - Lexmark X940e Service Manual

7510-XXX
10. Remove the sensor (ADF angle) (A).
Connector
A

Scanner PS card assembly removal

1. Remove the platen cushion assembly. See "Platen cushion removal" on page 4-127.
2. Remove the ADF unit assembly. See "ADF unit assembly removal" on page 4-126.
3. Remove the scanner left cover. See "Scanner left cover removal" on page 4-114.
4. Remove the scanner right cover. See "Scanner right cover removal" on page 4-115.
5. Remove the scanner top rear cover assembly. See "Scanner top rear cover removal" on page 4-115.
6. Remove the two screws securing the scanner PS card assembly (A) to the machine.
7. Disconnect all the connectors from the scanner PS card assembly (A).
4-123
Repair information