Sensor (Printer Left Lower Door Interlock) Removal; Rip Card Cooling Fan Cover Assembly Removal - Lexmark X940e Service Manual

Sensor (printer left lower door interlock) removal

1. Remove the rear cover assembly. See
2. Remove the rear left middle cover. See
3. Remove the MPF feed unit assembly. See
4. Release the hooks securing the sensor (printer left lower door interlock) (A) to the machine.
5. Remove the sensor (printer left lower interlock (A).
6. Disconnect the connector from the sensor (printer left lower door interlock) (A).

RIP card cooling fan cover assembly removal

1. Remove the rear cover assembly. See
2. Remove the right cover assembly. See
3. Remove the top cover assembly. See
4. Remove the RIP card assembly. See
5. Disconnect the connector from the RIP card cooling fan cover assembly (A).
6. Remove the four screws securing the controller box top over assembly (A) to the machine.
7. Move the RIP card cooling fan cover assembly (A) toward the front of the machine.
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
"MPF feed unit assembly removal" on page
"Rear cover assembly removal" on page
"Right cover assembly removal" on page 4-4
"Top cover assembly removal" on page
"RIP card assembly removal" on page
7510-XXX
4-5.
4-6.
4-8.
4-5.
4-4.
4-71.
4-67
Repair information