Sensor (Media Level) Late Error (Tray 2) - Lexmark X940e Service Manual

Step
3 Check the tray 2 switch (media size) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor Test.
4. Touch Tray 2.
5. Touch Tray 2 present.
Does the display on the operator panel, change every time
the media tray is opened and closed?
4 Check the tray 2 switch (media size) for proper connection.
Is the above component properly connected?
5 Perform a POR.
Does the error continue when the power is turned off/on?

942.01 Sensor (media level) late error (tray 2)

Step
1 Check the media.
Is media loaded in tray 2 properly?
2 Check the sensor (media level) (tray 2) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor Test.
4. Touch Tray 2.
5. Touch Media level.
Does the display on the operator panel, change every time
the media tray is opened and closed?
3
Check the sensor (media level) (tray 2) for proper
connection.
Is the above component properly connected?
Check
Check
Yes
Go to step 5. Go to step 4.
Replace the switch Replace the
(media size). connection.
Go to "Switch
(media size)
removal" on
page 4-111.
Replace the upper Problem solved.
printer engine card
assembly.
Go to "Upper
printer engine
card assembly
removal" on
page 4-74.
Yes
Go to step 2. Load media
properly.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (media connection.
level).
Go to "Sensor
(media level)
removal" on
page 4-24.
Diagnostic information
7510-XXX
No
No
2-157