7510-XXX
8. Remove the developer interlock plate assembly. See
page 4-49
9. Remove the developer unit assembly. See
10. Using a prying tool, gently release the two tabs securing the top cover (A) to the assembly.
11. Remove the top cover (A).
12. Completely remove the carrier (B) from the assembly by dumping it and using a toner vacuum or if installing a new
developer unit assembly, go to next step.
Replacement warning: If reusing an existing developer unit assembly, ensure that all traces of old carrier (B) are
removed from the developer unit assembly, or print quality issues may occur.
4-56
MFP Service Manual
"Developer interlock plate assembly removal" on
"Developer unit assembly removal" on page
B
4-53.