Sensor (Scanner Hp) Removal - Lexmark X940e Service Manual

Sensor (scanner HP) removal

1. Remove the scanner top rear cover. See
2. Remove the large platen glass. See
3. Gently move the scanner carriage (A) rightward to provide access to the sensor (scanner HP) (B).
4. Release the hooks securing the sensor (scanner HP) (B) to the scanner unit assembly.
5. Disconnect the connector from the sensor (scanner HP) (B).
6. Remove the sensor (scanner HP) (B).
Connectors
Connector
"Scanner top rear cover removal" on page
"Large platen glass removal" on page
B
Connector
B
Connector
C
4-114.
A
Repair information
7510-XXX
4-115.
4-121