Mpf / Transport Drive Motor Assembly Removal - Lexmark X940e Service Manual

7510-XXX

MPF / transport drive motor assembly removal

1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
on page 4-99.
3. Remove the developer / transfer roll HVPS card assembly. See
removal" on page
4. Remove the rear left middle cover. See
5. Remove the 24V LVPS card bracket assembly. See
6. Remove the CMYK transfer HVPS card assembly. See
page 4-91.
7. Disconnect the connector from the MPF transport drive motor assembly (A).
8. Remove the three screws securing the MPF/transport drive motor assembly (A) to the machine.
9. Remove the MPF/transport drive motor assembly (A).
4-102
MFP Service Manual
"Rear cover assembly removal" on page
4-100.
"Rear left middle cover removal" on page
A
"Rear upper cooling fan bracket assembly removal"
"Developer / transfer roll HVPS card assembly
"24V LVPS card bracket assembly removal" on page
"CMYK transfer HVPS card assembly removal" on
Connector
4-5.
4-6.
4-82.