Sensor (Media Level) Removal - Lexmark X940e Service Manual

7510-XXX

Sensor (media level) removal

1. Remove the printer left lower door assembly. See
2. Remove the appropriate media feed unit assembly. See
3. Disconnect the connector from the sensor (media level) (A).
4. Release the hooks securing the sensor (media level) (A) to the media feed unit.
5. Remove the sensor (media level) (A).
4-24
MFP Service Manual
"Printer left lower door assembly removal" on page
"Media feed unit assembly 1 removal" on page
Front
Harness
Hooks
Lower view
A
4-8.
4-21.