Hightfrequency Bands - Lexmark X940e Service Manual

7510-XXX

Hightfrequency bands

Step
1 Check the four PC cartridges for proper installation.
Check the PC cartridge connections.
Are the PC cartridge connections free of excess wear
and contamination?
2 Replace the four developer units and four developer
carriers. Go to
on page 4-53
replacement" on page
Does the problem remain?
3 Replace the printhead. Go to
removal" on page
Does the problem remain?
4 Re-adjust the color registration (Regcon) for the new
printhead. Go to
page
Does the problem remain?
5 Check the upper printer engine card assembly.
Replace the upper printer engine card assembly.
Go to
on page
Perform a print test.
Does the problem continue?
2-220
MFP Service Manual
Check
"Developer unit assembly removal"
and "Developer carrier removal and
4-55.
"Printhead assembly
4-92.
"Color registration (RegCon)" on
4-254.
"Upper printer engine card assembly removal"
4-74.
Yes
Go to step 2. Correct and
clean
contaminated
pins, or replace
the appropriate
PC cartridge or
connector.
Go to step 3. Problem solved.
Go to step 2. Problem solved.
Go to step 3. Problem solved.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-71.
No