7510-XXX
1X 500-sheet drawer (1TM)—sensor (media out) removal
1. Remove the media feed unit assembly. See
(tray 2)" on page
2. Remove the media out actuator. See
page
4-238.
3. Disconnect the connector from the sensor (media out) (A).
4. Release the hooks securing the sensor (media out) (A) to the media feed unit assembly.
5. Remove the sensor (media out) (A).
4-240
MFP Service Manual
"1X 500-sheet drawer (1TM)–media feed unit assembly removal
4-233.
"1X 500-sheet drawer (1TM)–media out actuator removal" on
Harness
Lower view
Front
A
Hook
Hooks