Developer Interlock Plate Assembly Removal - Lexmark X940e Service Manual

Developer interlock plate assembly removal

Warning: Always perform color registration adjustment (RegCon) when removing or reinstalling the printhead,
NVM initialization, or developer interlock plate assembly. See
1. Remove the printer front door assembly. See
2. Remove the front left cover. See
3. Remove the waste toner cartridge cover. See
Note: It is not required to remove the waste toner cartridge sensor assembly; allow it to loosely hang out of the
way.
4. Remove the waste toner cartridge sensor assembly. See
on page 4-39.
5. Remove the inner cover. See
6. Remove the three CMY toner add assemblies. See
7. Remove the K toner add assembly. See
8. Remove the harnesses from the clamps on the developer interlock plate assembly (A).
Shutter
"Printer front door assembly removal" on page
"Front left cover removal" on page
"Waste toner cartridge cover removal" on page
"Inner cover removal" on page
"K toner add assembly removal" on page
A
"Color registration (RegCon)" on page
4-9.
"Waste toner cartridge sensor assembly removal"
4-43.
"CMY toner add assembly removal" on page
7510-XXX
4-254.
4-3.
4-39.
4-47.
4-48.
4-49
Repair information