7510-XXX
295.05 Mixed size not supported
Step
1
Check the mixed sizes setting.
Is the above setting properly selected for mixed sizes?
298.01 Scanner cable missing or unplugged
Step
1
Check the scanner main power connection.
Is the above component properly connected?
2
Check the multiple connections on the scanner controller
card assembly.
Are all the connections on the above component properly
connected?
3
Perform a POR.
Does the error remain when the power is turned off/on
again?
Black toner cartridge detection error 841.00 Image pipeline ASIC error
Step
1
Check the black toner cartridge for proper installation.
Is the above component properly installed?
2
Replace t he black toner cartridge.
Does the error continue?
3
Check the sensor (RFID toner cartridge) for the black toner
cartridge for proper connection.
Is the above component properly connected?
4
Perform a POR.
Does the error remain when the power is turned off/on?
2-106
MFP Service Manual
Check
Check
Check
Yes
Perform a POR
Select mixed
and refeed
sizes setting.
originals.
Yes
Go to step 2.
Replace the
connections.
Replace the
Replace the
scanner controller
connections.
card assembly.
Go to Go to
"Scanner
controller card
assembly
removal" on
page
4-120.
Replace the RIP
Problem solved.
card assembly.
Go to
"RIP card
assembly
removal" on
page
4-71.
Yes
Go to step 3.
Reinstall the black
toner cartridge.
Got to step 3.
Problem solved.
Replace the
Replace the
sensor (RFID
connection.
toner cartridge).
Go to
"Sensor
(RFID toner
cartridge)
removal" on
page
4-106.
Replace the upper
Problem solved.
printer engine card
assembly.
Go to
"Upper
printer engine
card assembly
removal" on
page
4-74.
No
No
No