7510-XXX
Control
Media size control
Media tray assembly feeding
The following table gives the states (on/off) of the switches on the switch (media size), corresponding to the
media sizes of the media tray assembly.
Note: The switches on the switch (media size) are denoted by "S/W2", "S/W4", "S/W3", "S/W5", and "S/W1"
respectively from the left side.
Media size
No media tray assembly
5.5" X 8.5"SEF/A5 SEF
B5 SEF
8.5" X 13"SEF
8.5" X 14"SEF
A4 SEF
8.5" X 11"SEF
A4 LEF
A3 SEF
B5 LEF/executive LEF
8K SEF(TFX/GCO)
B4 SEF
8.5" X 11"LEF
16K LEF(TFX/GCO)
11" X 17"LEF
Printhead control
Rotation of printhead motor
The on/off control of the printhead motor is performed according to the mode of operation as shown below.
Operation mode
Standby mode
Print mode
Sleep mode
1-26
MFP Service Manual
Analog switch
S/W1
S/W2
S/W3
Off
Off
Off
Off
Off
Off
Off
On
Off
On
Off
On
Off
On
On
Off
On
Off
On
On
On
On
On
On
On
On
On
On
On
On
PRINTHEAD motor on/off
Always off
Turns on upon receiving the signal from the controller,
and turns off after a preset time has passed from the
end of printing. Also turns off if a print command is not
received within 30 seconds from the reception of the
signal.
Always off
Digital
switch
S/W4
S/W5
Off
Off
Off
On
Off
Off
On
On
On
Off
On
Off
Off
On
On
On
Off
Off
On
Off
On
On
Off
Off
On
On
Off
Off
Off
On
Off
On
Off
Off
On
On
On
Off
Off
On
Off
On
On
On
On