Lexmark X940e Service Manual page 149

Error code or
message
Empty hole Punch waste box full.
punch box
Insert hole Punch waste box missing.
punch box
Load staples Staple cartridge empty.
Load tray x with No media in the selected
<media> media tray.
Remove paper Finisher upper media bin full.
from bin 1
Remove paper Stacker media bin full (no
from bin 2 mix)
Remove paper Stacker media bin full (mix
from bin 2 size)
Remove paper Standard bin 1 full.
from standard
output bin
Scanner ADF ADF left cover assembly is
cover open open
Scanner Scanner unit assembly not
missing cable detected
unplugged
Toner Toner cartridge RFID error
unsupported
Error contents Description/Action
The punch waste box is full.
Refer to the Finisher Service Manual.
No punch waste box.
Refer to the Finisher Service Manual.
Staple cartridge empty.
Refer to the Finisher Service Manual.
Media is not loaded in the tray.
Go to "No media in the selected media tray" on
page 2-168.
Stacker set over count
The upper media bin has reached maximum
capacity.
Refer to the Finisher Service Manual.
The stacker media bin has reached maximum
capacity (no mix).
Refer to the Finisher Service Manual.
The stacker media bin has reached maximum
capacity (mix size).
Refer to the Finisher Service Manual.
Media in standard bin 1 is at maximum capacity.
Go to "Standard media bin full" on page
The ADF left cover assembly is open.
Go to "ADF left cover assembly is open" on
page 2-176.
The scanner unit assembly is unplugged or missing.
Go to "Scanner unit assembly not detected" on
page 2-175.
A toner cartridge of a different specification is
installed.
"Toner cartridge set error" on page
Go to
Diagnostic information
7510-XXX
2-175.
2-177.
2-35