Cmyk Pc Cartridge Drive Motor Assembly Removal - Lexmark X940e Service Manual

7510-XXX

CMYK PC cartridge drive motor assembly removal

Warning: Ensure that all four PC cartridges are concealed from all sources of light, or damage will occur.
1. Remove the four PC cartridges from the machine.
2. Remove the rear cover assembly. See
3. Remove the rear left middle cover. See
4. Remove the rear upper cooling fan bracket assembly. See
on page 4-99.
5. Remove the developer / transfer roll HVPS card assembly. See
removal" on page
6. Remove the lower printer engine card bracket assembly. See
removal" on page
7. Remove the 5V LVPS card bracket assembly. See
8. Remove the transfer belt drive motor assembly. See
page 4-79.
9. Remove the duplex unit assembly. See
10. Remove the fuser unit assembly. See
11. Remove the MPF feed unit assembly. See
12. Remove the developer / transfer roll HVPS card assembly. See
removal" on page
13. Remove the 24V LVPS card bracket assembly. See
14. Remove the CMYK transfer HVPS card assembly. See
page 4-91
15. Remove the K developer transport drive motor assembly. See
removal" on page
16. Remove the two connectors from the CMYK PC cartridge drive motor assembly (A).
17. Release the hook securing the access cover (B) to the machine.
18. Remove the access cover (B).
19. Remove the two screws securing the socket (C) to the machine.
20. Detach the socket (C) from the machine.
Note: The lower left screw can be accessed through the hole in the frame where the socket (B) was detached in
step 7.
21. Remove the eight screws securing the CMY PC cartridge drive motor assembly (A) to the machine.
22. When removing the CMYK PC cartridge drive motor assembly (A), ensure none of the harnesses become
damaged.
23. Remove the CMYK PC cartridge drive motor assembly (A).
4-88
MFP Service Manual
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
4-100.
4-76.
"Duplex unit assembly removal" on page
"Duplex controller card assembly removal" on page
"MPF feed unit assembly removal" on page
4-100.
4-93.
Connector
B
C
"Rear upper cooling fan bracket assembly removal"
"Developer / transfer roll HVPS card assembly
"Lower printer engine card bracket assembly
"5V LVPS card bracket assembly removal" on page
"Transfer belt drive motor assembly removal" on
"Developer / transfer roll HVPS card assembly
"24V LVPS card bracket assembly removal" on page
"CMYK transfer HVPS card assembly removal" on
"K developer / transport drive motor assembly
Connector
A
Screwdriver
access hole
4-5.
4-6.
4-83.
4-10.
4-14.
4-8.
4-82.