Sensor (Tray 2 Feed-Out) Late Jam (Feeding From Tray 3) - Lexmark X940e Service Manual

7510-XXX
Step
10 Perform a print test.
Does the error continue?

243.01 Sensor (tray 2 feed-out) late jam (feeding from tray 3)

Step
1 Check the media condition.
Is the media in the tray crumpled or damaged?
2 Check the media position.
Does the media touch the sensor (tray 2 feed-out)?
3 Check the sensor (tray 2 feed-out) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor test.
4. Touch Tray 2.
5. Touch Feed-out.
Does the display on the operator panel, change every
time the sensing area of the above sensor is interrupted
or blocked?
4 Check the sensor (tray 2 feed-out) for proper
connection.
Is the above component properly connected?
5
Check the sensor (tray 3 feed-out) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor test.
4. Touch Tray 3.
5. Touch Feed-out.
Does the display on the operator panel, change every
time the sensing area of the above sensor is interrupted
or blocked?
6
Check the sensor (tray 3 feed-out) for proper
connection.
Is the above component properly connected?
2-56
MFP Service Manual
Check
Check
Yes
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine card
assembly removal"
on page 4-77.
Yes
Replace the Go to step 2.
damaged media with
new.
Remove the media. Go to step 5
Go to step 5. Go to step 4.
Replace the sensor Replace the
(tray 2 feed-out). connection.
Go to step 7. Go to step 6.
Replace the sensor Replace the
(tray 3 feed-out). connection.
No
No