500-Sheet Drawer (3Tm)-Sensor (Media Out) Removal - Lexmark X940e Service Manual

7510-XXX
3X 500-sheet drawer (3TM)—sensor (media out) removal
1. Remove the media feed unit assembly.
(tray 2)" on page 4-212
page 4-210.
2. Remove the media out actuator. See
page 4-216.
3. Disconnect the connector from the sensor (media out) (A).
4. Release the hooks securing the sensor (media out) (A) to the media feed unit assembly.
5. Remove the sensor (media out) (A).
4-218
MFP Service Manual
See"3X 500-sheet drawer (3TM)–media feed unit assembly removal
or "3X 500-sheet drawer (3TM)–media feed unit assembly removal (tray 3)" on
"3X 500-sheet drawer (3TM)–media out actuator removal" on
Harness
Hook
Lower view
Front
A
Hooks