Cmyk Transfer Hvps Card Assembly Removal - Lexmark X940e Service Manual

18. Remove the CMYK toner add motor assembly (A).

CMYK transfer HVPS card assembly removal

1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
removal" on page
3. Remove the developer / transfer roll HVPS card assembly. See
removal" on page
4. Remove the rear left middle cover. See
5. Remove the 24V LVPS card bracket assembly. See
6. Disconnect the two connectors from the CMYK transfer HVPS card assembly (A).
7. Disconnect the four faston connectors from the CMYK transfer HVPS card assembly (A).
8. Remove the two screws securing the CMYK transfer HVPS card assembly (A) to the machine.
9. Remove the CMYK transfer HVPS card assembly (A).
Clamps
A
"Rear cover assembly removal" on page
4-99.
4-100.
"Rear left middle cover removal" on page
Connectors
"Rear upper cooling fan bracket assembly
"Developer / transfer roll HVPS card assembly
"24V LVPS card bracket assembly removal" on page
7510-XXX
4-5.
4-6.
4-82.
4-91
Repair information