Rot & Radius - Raytheon NautoPilot NP 5100 Operator's Manual

OPERATION
NautoPilot 5000 Series
2.3.6.3 RoT & Radius
Figure 51: RoT & Radius ("Page" function)
RoT
Use the "+" and "--" softkeys to adjust the max. turn rate for a heading/course change.
Press the "SET" button to transmit this value to the controller.
Value range: 5/min to 500/min (in increments of 1/min).
Radius
Use the "+" and "--" softkeys to adjust the min. radius for a heading/course change.
Press the "SET" button to transmit this value to the controller.
Value range: 0.1NM to 5.0NM (in increments of 0.1 NM). (NM = Nautical mile)
Selected
Use this pull down menu to select a heading/course change mode.
This function is identical to the "Rad/RoT" softkey; see the first display of Figure 22.
Note:
Rad/RoT is not adjustable in mode Track Control with RAYTHEON Anschütz ECDIS.
86
4002.DOC010102 Edition: September 2014