Raytheon NautoPilot NP 5100 Operator's Manual page 77

Table 8
Figure 32/1
Figure 32/2
Figure 32/3
Figure 32/4
Figure 32/5
Figure 32/6
Edition: September 2014
OPERATION
NautoPilot 5000 Series
Softkeys for "NP 5000 Actual Rudder" display
Display with graphic information on the actual rudder angle
Information on heading source and actual heading value.
Set heading value.
For Course Control this display is designated as "Presel.COG"
(Preselected Course Over Ground) after turning the rotary
knob, "Set COG" after releasing the knob (in increments of 1
degree or 1/10 degree -- depends on selected resolution).
For Track Control this display is designated as "Track Course".
For Heading Control this display is designated as "Set Head-
ing".
Touch--icon, toggles resolution for the respective value.
Numerical display for the ruder angle in degrees, an arrow next
to this display shows the direction of the rudder angle.
For two rudders a second numerical and graphical information
is displayed.
Softkey for switching to the main display.
65
Function
AUTOPILOT
4002.DOC010102