Figure 43: Indicated Values/Parameters ("Page" Function) - Raytheon NautoPilot NP 5100 Operator's Manual

Figure 43: Indicated values/parameters ("Page" function)

7
6
5
4
3
2
1
Table 12
Figure 43/1
Figure 43/2
Figure 43/3
Figure 43/4
Figure 43/5
Figure 43/6
Figure 43/7
4002.DOC010102
OPERATION
NautoPilot 5000 Series
Indicated values/parameters ("Page" function)
Adjusted Counter rudder parameter (see also section 1.3.3).
Value range: 1 to 9 (in increments of 1).
Adjusted rudder parameter (see also section1.3.2).
Value range: 1 to 9 (in increments of 1).
Adjusted yawing parameter (see also section1.3.1).
Value range: 1 to 6 (in increments of 1).
Indicates speed value used by the controller.
Value range for manual adjustment: 5.0kn to 90.0kn,
(in increments of 0.1kn).
Heading monitor displays the configured limit for the Heading
Monitor alert. Value range: 5 to 30 (in increments of 1) (see
section 1.3.5).
Off Heading displays the configured limit for the Off Heading
alert. Value range: 5 to 30 (in increments of 1) (see section
1.3.6).
This adjustment is used during the control function of the Auto-
pilot and should be adjusted within the configured limits. (Con-
figuration value = maximum/physical rudder limits,
Adjusted value in the "Page" function = limits for the control
loop).
Value range: 5 to 35 (in increments of 1) (depends on config-
ured limits -- theoretical 5 to 180).
80
Function
Edition: September 2014