-- A set course change (heading change or preselected heading change) is not
possible if:
4.3
Heading Control
After activating the "Heading Control" mode, the actual heading value is taken as the set
heading value and the Autopilot controls this heading.
Edition: September 2014
NautoPilot 5000 Series
An operating mode is selected which does not allow a heading change via the
Autopilot.
A display is selected which does not display the heading change value,
for example during adjustments.
In this case the unintentional operation of the rotary knob is signalized
with 5 short acoustical sounds.
OPERATION
101
AUTOPILOT
4002.DOC010102