Raytheon NautoPilot NP 5100 Operator's Manual page 71

This display in Figure 28 shows numerical and graphical recorded information on:
-- Actual heading
-- Set heading
-- Rudder position angle
-- Current operating mode at the AutoPilot which is still active.
Table 6
Figure 28/1
Figure 28/2
Figure 28/3
Figure 28/4
Figure 28/5
Figure 28/6
Figure 28/7
Figure 28/8
Figure 28/9
Figure 28/10 Set heading value.
Figure 28/11 Touch--icon, toggles resolution for the set heading value.
Figure 28/12 Set Heading is displayed by an orange dotted line.
Figure 28/13 Rudder angle value with an arrow indicating
Figure 28/14 Softkey, switches to the "Actual Parameter" display.
Figure 28/15 Softkey, switches to the main (initial) display.
Figure 28/16 Touch--icon, toggles resolution for the rudder angle axis
Edition: September 2014
OPERATION
NautoPilot 5000 Series
or Set COG or Track Course
(depends on selected control mode)
Softkeys for "HDG/Rudder Plot" display
Touch--icon, displays a legend for the recorded information.
Axis for recorded rudder angle [deg].
The rudder position angle is displayed as a magenta colored
graph.
Time axis for records [min].
Touch--icon, toggles resolution for the time axis 5 min / 20 min.
Axis for recorded current heading.
Touch--icon, toggles resolution for the heading axis
+/-- 20 deg / +/-- 60 deg.
The actual heading is displayed as a blue graph.
Information regarding heading source and actual heading
value.
For Course Control this display is designated as "Presel.COG"
(Preselected Course Over Ground) after turning the rotary
knob, "Set COG" after releasing the knob.
For Track Control this display is designated as "Track Course".
For Heading Control this display is designated as "Set Head-
ing".
the rudder direction.
+/-- 8 deg / +/-- 16 deg.
59
Function
AUTOPILOT
4002.DOC010102