Table of Contents
Advertisement
Table 4
Figure 22/1
Figure 22/2
Figure 22/3
Figure 22/4
Figure 22/5
Figure 22/6
Figure 22/7
Figure 22/8
Figure 22/9
Figure 22/10 Softkey for switching between night and day modes.
Edition: September 2014
OPERATION
NautoPilot 5000 Series
Operating and monitoring elements for the first display
(after switching ON the NautoPilot Operator Unit)
Indicates the type of NautoPilot: NP 5100, NP 5300, NP 5400 or
NP 5500.
Alert and status bar (top bar of the display). Alerts and status informa-
tion are displayed alphanumerical. They must be acknowledged.
For more information see the NautoPilot Operator Unit Service Manual.
Indicates the actual heading value from the selected heading source.
Indicates the selected heading source.
Possible heading sources are:
-- Gyro
-- GPS
-- Mag
Uncorrected Magnetic Heading (magnetic heading without
correction values for variation/deviation)
Indicates the operation mode / status of the Autopilot:
Heading Ctrl, see also section 1.4.3 ( - - all types of NautoPilot - - ) or
Course Ctrl, see also section 1.4.4 ( - - not for NautoPilot 5100 - - ) or
Track Ctrl, see also section 1.4.5 ( - - all types of NautoPilot - - ) or
Override, see also section 1.4.8 ( - - all types of NautoPilot - - ) or
Manual, see also section 1.4.7 ( - - all types of NautoPilot - - ) or
Standby, see also section1.4.2 ( - - all types of NautoPilot - - ) or
------------, see section 1.4.2 ( - - all types of NautoPilot - - )
Indicates selected mode Economy or Precision, selectable via the soft-
key "Eco/Prec" (Figure 22/18)
Not for NP 5100 or if the "Adaptive mode" is not configured.
Otherwise the softkey is designated as "Para/Mem".
Indicates the difference between actual heading and set heading in a
tendency bar structure.
For Course Control mode this bar is designated as
"Distance to Courseline".
See also section 2.3.1.
For Track Control mode this display is designated as
"Cross Track Error".
Indicates the set heading value from a manual steering control unit
(Handwheel/Tiller/Rotary knob).
This display also acts as a softkey; by touching it, the display resolution
is changed and the small icon (Figure 22/9) changes.
For Course Control mode this display is designated as
"Set Course Over Ground".
For Track Control mode it is designated as "Track Course".
Resolution icon.
Softkey to switch the resolution of the set heading value between
1 and 1/10.
51
Function
AUTOPILOT
4002.DOC010102
Hide quick links:
Advertisement
Table of Contents
