Operation; Operation Elements At The Nautopilot Operator Unit - Raytheon NautoPilot NP 5100 Operator's Manual

2

Operation

2.1

Operation elements at the NautoPilot Operator Unit

Figure 20: NautoPilot Operator Unit (operation elements)
1
Table 3
Pos.
Figure 20/1
Figure 20/2
Edition: September 2014
OPERATION
NautoPilot 5000 Series
NautoPilot 5000 Series
8 7
NautoPilot Operator Unit (operation elements)
Designation
Touchscreen
"HEADING" button
with two LEDs
2
3
4
5
6
Remarks
For the display of data and operation of the
Autopilot via soft--keys.
Activates Heading Control mode.
LED (upper, green) indicates the selected
steering mode.
LED (lower, yellow) indicates:
-- Selected steering mode, but NautoPilot
Operation Unit is inactive (control from a
second NautoPilot Operator Unit).
The inactive NautoPilot operator Unit
serves as a display only ("OU Display" is
displayed at the top right corner).
-- AS application:
"Standby" is displayed at the top right
corner, the Autopilot can be activated by
pressing the button "Heading".
-- Standalone application:
Autopilot cannot be activated.
A switching over of the Main Steering
Switch to "AUTO" the lower LED is off and
the upper LED is alight (steering mode is
"Heading Control".
47
AUTOPILOT
4002.DOC010102