Figure 33/17 Softkey for switching an alarm ON or OFF if the acceleration
Figure 33/18 Softkey for adjusting speed.
Figure 33/19 Softkey for adjusting the Rate of Turn (in degrees) in combina-
Figure 33/20 Softkey for adjusting the acceleration limit. This adjustment in-
Please note:
Critical values are displayed with a small attention icon.
These values must be checked and corrected.
Figure 34: Example of a request to press "SET" after a parameter has been changed
4002.DOC010102
OPERATION
NautoPilot 5000 Series
overshoots an adjusted acceleration limit value (percentage
value).
Possible settings are:
-- Off (no alert)
-- On (an alert is activated if the limit is reached or
exceeded). "Accel. Monitor" is displayed in the status bar
at the top of the display.
Adjusted value influences the "Acceleration Limit" (indication at
the top of this display).
Value range: 0.0kn to 90.0kn (in increments of 1kn).
tion with the speed.
Adjusted value influences the "Acceleration Limit" (indication at
the top of this display).
Value range: 5/min to 500/min (in increments of 1/min.)
fluences the Rate of Turn in the display below.
Value range: 0.000m/s
2
0.001m/s
).
68
Function
2
2
to 9.999/m/s
(in increments of
Edition: September 2014