D-Link DES-3010F Command Line Interface Manual page 99

create multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create multicast MAC forwarding:
DES-3026:4#create multicast_fdb default 01-00-5E-00-00-00
Command: create multicast_fdb default 01-00-5E-00-00-00
Success.
DES-3026:4#
config multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add multicast MAC forwarding:
DES-3026:4#config multicast_fdb default 01-00-5E-00-00-00
add 1
Command: config multicast_fdb default 01-00-5E-00-00-00
add 1
Success.
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to create a static entry to the multicast MAC address
forwarding table (database).
create multicast_fdb <vlan_name 32> <macaddr>
This command will make an entry into the Switch's multicast MAC
address forwarding database.
<vlan_name 32>  The name of the VLAN on which the MAC
address resides.
<macaddr>  The MAC address that will be added to the forwarding
table.
Only Administrator-level users can issue this command.
Used to configure the Switch's multicast MAC address forwarding
database.
config multicast_fdb <vlan_name 32> <macaddr> [add | delete]
<portlist>
This command configures the multicast MAC address forwarding
table.
<vlan_name 32>  The name of the VLAN on which the MAC
address resides.
<macaddr>  The MAC address that will be added to the forwarding
table.
[add | delete]  Add will add the MAC address to the forwarding
table. Delete will remove the MAC address from the forwarding
table.
<portlist>  Specifies a port or range of ports to be configured.
Only Administrator-level users can issue this command.
95