show snmp community
Restrictions
Example usage:
To display the currently entered SNMP community strings:
DES-3026:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
--------------------
dlink
private
public
Total Entries: 3
DES-3026:4#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"
DES-3000 Series Layer 2 Switch CLI Reference Manual
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch's SNMP
agent.
None.
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID 10-64>
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
<snmp_engineID 10-64> An alphanumeric string between 10 and
64 characters that will be used to identify the SNMP engine on the
Switch.
Only Administrator-level users can issue this command.
DES-3026:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-3026:4#
View Name
---------------------
ReadView
CommunityView
CommunityView
35
Access Right
------------
read_write
read_write
read_only