D-Link DES-3010F Command Line Interface Manual page 61

disable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the DHCP relay function:
DES-3026:4# disable dhcp_relay
Command: disable dhcp_relay
Success.
DES-3026:4#
show dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to disable the DHCP relay function on the switch.
disable dhcp_relay
The disable dhcp_relay command disables the DHCP relay function
on the switch.
None
Only Administrator and Operator-level users can issue this
command.
Used to display the current DHCP relay configuration.
show dhcp_relay {ipif <ipif_name 12>}
The show dhcp_relay command displays the current DHCP relay
configuration.
<ipif_name 12> – IP interface name.
If no parameter specified, the system will be display all dhcp relay
configuration.
None.
57