The SSH Server commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
config ssh algorithm
show ssh algorithm
config ssh authmode
show ssh authmode
config ssh user
show ssh user authmode
config ssh server
enable ssh
disable ssh
show ssh server
Each command is listed, in detail, in the following sections.
config ssh algorithm
Purpose
Syntax
Description
Parameters
DES-3000 Series Layer 2 Switch CLI Reference Manual
Parameters
[3DES| AES128| AES192| AES256| arcfour|blowfish|
cast128| twofish128| twofish192| twofish256| MD5| SHA1|
RSA| DSA] [enable| disable]
[password|publickey|hostbased ] [enable|disable]
<username 15> authmode [publickey |password
|hostbased [hostname <domain_name 32> |hostname_ip
<domain_name 32> <ipaddr>]]
{maxsession <int 1-8> |contimeout <sec 120-600>
|authfail <int 2-20> | rekey [10min |30min |60min |never]}
Used to configure the SSH server algorithm.
config ssh algorithm [3DES| AES128| AES192| AES256|
arcfour|blowfish| cast128| twofish128|twofish192| twofish256| MD5|
SHA1| RSA| DSA] [enable| disable]
The config ssh algorithm command configures the SSH service algorithm.
3DES An SSH server encryption algorithm.
AES128 An SSH server encryption algorithm.
AES192 An SSH server encryption algorithm.
AES256 An SSH server encryption algorithm.
Arcfour An SSH server encryption algorithm.
Blowfish An SSH server encryption algorithm.
cast128 An SSH server encryption algorithm.
twofish 128 An SSH server encryption algorithm.
twofish192 An SSH server encryption algorithm.
twofish256 An SSH server encryption algorithm.
MD5 An SSH server encryption algorithm.
SSH S
214
33
C
ERVER
OMMANDS