D-Link DES-3010F Command Line Interface Manual page 118

config scheduling_mechanism
Parameters
Restrictions
Example usage:
To configure the traffic scheduling mechanism for each COS queue:
DES-3026:4#config scheduling_mechanism strict
Command: config scheduling_mechanism strict
Success.
DES-3026:4#
show scheduling_mechanism
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To show the scheduling mechanism:
DES-3026:4#show scheduling_mechanism
Command: show scheduling_mechanism
Scheduling
DES-3026:4#
config bandwidth_control
Purpose
Syntax
Description
DES-3000 Series Layer 2 Switch CLI Reference Manual
resume clearing its queue.
strict – Entering the strict parameter indicates that the highest class of
service is the first to be processed. That is, the highest class of service
should finish emptying before the others begin. Other classes of service
will follow weight fair scheduling.
weight_fair – Entering the weight fair parameter indicates that the
priority classes of service will empty packets in a weighted round-robin
(WRR) order. That is to say that they will be emptied in an even
distribution.
Only Administrator-level users can issue this command.
Used to display the current traffic scheduling mechanisms in use on
the Switch.
show scheduling_mechanism
This command will display the current traffic scheduling mechanism
in use on the Switch.
None.
None.
Mechanism : strict
Used to configure bandwidth control on a by-port basis.
config bandwidth_control [<portlist>] {rx_rate [no_limit | <value
64-1024000>] | tx_rate [no_limit | <value 64-1024000>]}
The config bandwidth_control command is used to configure
bandwidth on a by-port basis.
114