D-Link DES-3010F Command Line Interface Manual page 178

Example usage:
To display the 802.1x authentication states (stacking disabled) for Port-based 802.1x:
DES-3026:4#show 802.1x auth_state ports 1-5
Command: show 802.1x auth_state ports 1-5
Port
------
1
2
3
4
5
CTRL+C ESC q
Example usage:
To display the 802.1x authentication states (stacking disabled) for MAC-based 802.1x:
DES-3026:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port number
Index
------ ------------
1 00-08-02-4E-DA-FA
2
3
4
5
6
7
8
CTRL+C ESC q
show 802.1x auth_configuration
Purpose
Syntax
Description
DES-3000 Series Layer 2 Switch CLI Reference Manual
Auth PAE State
--------------
ForceAuth
ForceAuth
ForceAuth
ForceAuth
ForceAuth
Quit SPACE n
: 1
MAC Address Auth PAE State
---------------
Authenticated
Quit SPACE n Next Page
Used to display the current configuration of the 802.1x server on the Switch.
show 802.1x auth_configuration {ports <portlist>}
The show 802.1x command is used to display the current configuration of the
802.1x Port-based Network Access Control server application on the Switch.
The following details what is displayed:
802.1x Enabled/Disabled  Shows the current status of 802.1x functions on
the Switch.
Authentication Protocol: Radius_Eap  Shows the authentication protocol suite
in use between the Switch and a RADIUS server.
Port number  Shows the physical port number on the Switch.
Capability: Authenticator/None  Shows the capability of 802.1x functions on
the port number displayed above. There are four 802.1x capabilities that can
be set on the Switch: Authenticator, Supplicant, Authenticator and Supplicant,
and None.
Port Status: Authorized/Unauthorized  Shows the result of the authentication
Backend State Port Status
------------- ------------
Success Authorized
Success Authorized
Success Authorized
Success Authorized
Success Authorized
Next Page Enter
Backend State
-------------
Idle
Enter Next Entry
174
Next Entry a All
Port Status
-----------
Authorized
a All