D-Link DES-3010F Command Line Interface Manual page 189

show radius auth_client
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current RADIUS authentication client:
DES-3026:4#show auth_client
Command: show auth_client
radiusAuthClient ==>
radiusAuthClientInvalidServerAddresses
radiusAuthClientIdentifier
radiusAuthServerEntry ==>
radiusAuthServerIndex
radiusAuthServerAddress
radiusAuthClientServerPortNumber
radiusAuthClientRoundTripTime
radiusAuthClientAccessRequests
radiusAuthClientAccessRetransmissions
radiusAuthClientAccessAccepts
radiusAuthClientAccessRejects
radiusAuthClientAccessChallenges
radiusAuthClientMalformedAccessResponses
radiusAuthClientBadAuthenticators
radiusAuthClientPendingRequests
radiusAuthClientTimeouts
radiusAuthClientUnknownTypes
radiusAuthClientPacketsDropped
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_diagnostics
Purpose
Syntax
Description
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display the current RADIUS authentication client.
show auth_client
The show auth_client command is used to display the current
RADIUS authentication client currently configured on the Switch.
None.
None.
: 1
: 0.0.0.0
Used to display the current authentication diagnostics.
show auth_diagnostics {ports <portlist>}
The show auth_diagnostics command is used to display the
current authentication diagnostics of the Switch on a per port basis.
185
0
D-Link
0
0
0
0
0
0
0
0
0
0
0
0
0