D-Link DES-3010F Command Line Interface Manual page 116

config 802.1p default_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1p default priority on the Switch:
show 802.1p default_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current 802.1p default priority configuration on the Switch:
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to assign an 802.1p priority tag to an incoming untagged
packet that has no 802.1p priority tag.
config 802.1p default_priority [<portlist> | all] <priority 0-7>
The config 802.1p default_priority command allows specification
of the 802.1p priority value an untagged, incoming packet will be
assigned before being forwarded to its destination.
<portlist>  Specifies a port or range of ports to be configured.
all  Specifies that the config 802.1p default_priority command
will be applied to all ports on the Switch.
<priority 0-7>  Specifies the 802.1p priority value that an untagged,
incoming packet will be given before being forwarded to its
destination.
Only Administrator-level users can issue this command.
DES-3026:4#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DES-3026:4#
Used to display the currently configured 802.1p priority value that will
be assigned to an incoming, untagged packet before being
forwarded to its destination.
show 802.1p default_priority {<portlist>}
The show 802.1p default_priority command displays the currently
configured 802.1p priority value that will be assigned to an incoming,
untagged packet before being forwarded to its destination.
<portlist>  Specifies a port or range of ports to be viewed.
None.
112