D-Link DES-3010F Command Line Interface Manual page 192

DES-3026:4#show auth_statistics ports 1
Command: show auth_statistics ports 1
Port number : 1
EapolFramesRx
EapolFramesTx
EapolStartFramesRx
EapolReqIdFramesTx
EapolLogoffFramesRx
EapolReqFramesTx
EapolRespIdFramesRx
EapolRespFramesRx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
create 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a previously created VLAN as an 802.1x Guest VLAN for the Switch.
DES-3000 Series Layer 2 Switch CLI Reference Manual
0
0
0
0
0
0
0
0
0
0
0
00-00-00-00-00-00
Used to configure a pre-existing VLAN as a 802.1x Guest VLAN.
create 802.1x guest_vlan <vlan_name 32>
The create 802.1x guest_vlan command is used to configure a pre-
defined VLAN as a 802.1x Guest VLAN. Guest 802.1X VLAN clients
are those who have not been authorized for 802.1x or they haven't
yet installed the necessary 802.1x software, yet would still like
limited access rights on the Switch.
<vlan_name 32> – Enter an alphanumeric string of no more than 32
characters to define a pre-existing VLAN as a 802.1x Guest VLAN.
This VLAN must have first been created with the create vlan
command mentioned earlier in this manual.
Only Administrator-level users can issue this command.
Users must have already previously created a VLAN using the
create vlan command. Only one VLAN can be set as the 802.1x
Guest VLAN.
188