D-Link DES-3010F Command Line Interface Manual page 42

Example usage:
To delete the SNMP group named "sg1".
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DES-3026:4#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
DES-3000 Series Layer 2 Switch CLI Reference Manual
DES-3026:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3026:4#
Used to display the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of
each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
Name : Group3
: ReadView
: WriteView
: NotifyView
: SNMPv3
: NoAuthNoPriv
Name : Group4
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authNoPriv
Name : Group5
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authNoPriv
Name : Group6
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authPriv
Name : Group7
38