D-Link DES-3010F Command Line Interface Manual page 43

DES-3000 Series Layer 2 Switch CLI Reference Manual
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Total Entries: 10
DES-3026:4#
create snmp host
Purpose Used to create a recipient of SNMP traps generated by the Switch's
SNMP agent.
Syntax create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv |
auth_nopriv | auth_priv] <auth_string 32>]
Description
The create snmp host command creates a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr>  The IP address of the remote management station that
Parameters
will serve as the SNMP host for the Switch.
v1 – Specifies that SNMP version 1 will be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and control
network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authPriv
: initial
: restricted
:
: restricted
: SNMPv3
: NoAuthNoPriv
: ReadGroup
: CommunityView
:
: CommunityView
: SNMPv1
: NoAuthNoPriv
: ReadGroup
: CommunityView
:
: CommunityView
: SNMPv2
: NoAuthNoPriv
: WriteGroup
: CommunityView
: CommunityView
: CommunityView
: SNMPv1
: NoAuthNoPriv
: WriteGroup
: CommunityView
: CommunityView
: CommunityView
: SNMPv2
: NoAuthNoPriv
39