D-Link DES-3010F Command Line Interface Manual page 23

enable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable HTTP and configure port number:
DES-3026:4#enable web 80
Command: enable web 80
Success.
DES-3026:4#
disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable HTTP:
DES-3026:4#disable web
Command: disable web
Success.
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to enable the HTTP-based management software on the
Switch.
enable web {<tcp_port_number 1-65535>}
This command is used to enable the Web-based management
software on the Switch.
<tcp_port_number 1-65535>  The TCP port number. TCP ports
are numbered between 1 and 65535. The "well-known" port for the
Web-based management software is 80.
Only Administrator-level users can issue this command.
Used to disable the HTTP-based management software on the
Switch.
disable web
This command disables the Web-based management software on
the Switch.
None.
Only Administrator-level users can issue this command.
19