D-Link DES-3010F Command Line Interface Manual page 16

config account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
DES-3026:4#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-3026:4#
show account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the accounts that have been created:
DES-3000 Series Layer 2 Switch CLI Reference Manual
DES-3026:4#
NOTICE: In case of lost passwords or password corruption, please refer to the
D-Link website and the White Paper entitled "Password Recovery Procedure",
which will guide you through the steps necessary to resolve this issue.
Used to configure user accounts.
config account <username> {encrypt [plain_text | sha_1]
<password>}
The config account command configures a user account that has
been created using the create account command.
<username> Enter the username of the account.
<password> Enter a password for the account.
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Used to display user accounts.
show account
Displays all user accounts created on the Switch. Up to 8 user
accounts can exist on the Switch at one time.
None.
Only Administrator-level users can issue this command.
12