config radius delete
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete previously configured RADIUS server communication settings:
config radius
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure RADIUS settings:
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to delete a previously entered RADIUS server configuration.
config radius delete <server_index 1-3>
The config radius delete command is used to delete a previously entered
RADIUS server configuration.
<server_index 1-3> Assigns a number to the current set of RADIUS
server settings. Up to three groups of RADIUS server settings can be
entered on the Switch.
Only Administrator-level users can issue this command.
DES-3026:4#config radius delete 1
Command: config radius delete 1
Success.
DES-3026:4#
Used to configure the Switch's RADIUS settings.
config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> | auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}
The config radius command is used to configure the Switch's RADIUS
settings.
<server_index 1-3> Assigns a number to the current set of RADIUS
server settings. Up to 3 groups of RADIUS server settings can be entered
on the Switch.
<server_ip> The IP address of the RADIUS server.
key Specifies that a password and encryption key will be used between
the Switch and the RADIUS server.
<passwd 32> The shared-secret key used by the RADIUS
server and the Switch. Up to 32 characters can be used.
default Returns all of the ports in the range to their default RADIUS
settings.
auth_port <udp_port_number 1-65535> The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535> The UDP port number for
accounting requests. The default is 1813.
Only Administrator-level users can issue this command.
181