D-Link DES-3010F Command Line Interface Manual page 46

enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable RMON:
DES-3026:4#enable rmon
Command: enable rmon
Success.
DES-3026:4#
disable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable RMON:
DES-3026:4#disable rmon
Command: disable rmon
Success.
DES-3026:4#
create trusted_host
Purpose
Syntax
Description
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to enable RMON on the Switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
None.
Only Administrator-level users can issue this command.
Used to disable RMON on the Switch.
disable rmon
This command is used, in conjunction with the enable rmon
command above, to enable and disable remote monitoring (RMON)
on the Switch.
None.
Only Administrator-level users can issue this command.
Used to create the trusted host.
create trusted_host [<ipaddr> | network <network_address>]
The create trusted_host command creates the trusted host. The
Switch specification of up to ten IP addresses that are allowed to
manage the Switch via in-band SNMP or TELNET based
management software. These IP addresses must be members of the
Management VLAN. If no IP addresses are specified, then there is
nothing to prevent any IP address from accessing the Switch,
provided the user knows the Username and Password.
42